toyolex series

What are Toyolex 3 and Toyolex 4?

At a glance, Toyolex 3 and Toyolex 4 sound like they might be sequential versions of one product – but that’s a misunderstanding. They are actually separate software solutions created for entirely different tasks. Both are third-party programs (commonly used in the automotive tuning world) that operate on Toyota and Lexus Denso ECU binary files, but their focus diverges sharply:

• Toyolex 3 is a multi-function ECU tuning tool. Its specialties are emissions and performance adjustments: erasing diagnostic trouble codes (DTCs), disabling Diesel Particulate Filters (DPFs), turning off Exhaust Gas Recirculation (EGR), removing AdBlue/urea injections, tweaking speed limiters (Vmax), and other special functions. Essentially, it lets you disable or tweak various factory-built engine and emissions features to improve performance, reliability, or adaptability for specific applications.
  
  

• Toyolex 4 (often called Toyolex 4 Black Diamond Edition) is an immobilizer (IMMO) disabling tool. Its sole purpose is to remove or “kill” the car’s security immobilizer from the ECU software. This is useful if you need the engine to run without its factory transponder key (for example, when converting an engine to a custom project, fixing a lost-key situation, or creating a test mule). Toyolex 4 focuses on finding the immoblizer data in the ECU’s flash file and wiping it, with an optional side effect of clearing any related fautlt codes.
  
  
  
  

In simple terms: Toyolex 3 = emisions/performance tweaking software (DPF, EGR, AdBlue, Vmax, etc.), while Toyolex 4 = dedicated immobilizer off software. They are not sequential upgrades of the same program; each has its own installer, its own license, and its own usage scenarios. Because the names are so similar, this article will often compare them side by side to help clear up confusion.

Deep Dive: Toyolex 3 Functionality (DPF, DTC, EGR, etc.)

Toyolex 3 is a Swiss Army knife for Toyota and Lexus ECUs. It works by loading a raw binary firmware file from a Denso ECU (read via an OBD flasher or bench programmer) and then altering that file to disable certain functions or clear error codes. Once the file is patched, you reflash the ECU with the modified data. The entire process is done on a Windows PC or laptop with the Toyolex 3 software installed.

Toyolex 3’s feature set covers many of the common tuning and emissions-issue needs for Toyota/Lexus models, on gasoline, diesel and even some hybrid ECUs. Its major capabilities include:

• Diagnostic Trouble Code (DTC) Erase: Toyolex 3 can scan and clear the ECU’s stored fault codes (the “Check Engine” or other lights) across all categories (Powertrain, Body, Network – P, B, and U codes). It presents a DTC list interface so you can select codes to erase. This is especially useful after disabling systems like DPF or EGR to remove the “system fault” warnings they cause.
  
  

• Diesel Particulate Filter (DPF) Removal: For diesel Toyota/Lexus engines equipped with a DPF, Toyolex 3 can disable that system. It detects the DPF logic in the ECU firmware and shuts it off. This prevents regeneration cycles and related fault codes, which is a common workaround when a DPF has physically failed or if the vehicle will never need emissions compliance (such as an off-road vehicle).
  
  

• EGR (Exhaust Gas Recirculation) Removal: Toyolex 3 can also turn off the EGR system. EGR recirculates exhaust gas into the intake to reduce NOx emissions, but it can cause carbon buildup and engine lag. Toyolex 3 finds the EGR parameters in the ECU file and disables them, ensuring the valve stays closed and clears any EGR-related codes.
  
  

• AdBlue/SCR System Disable: For diesel engines that use Selective Catalytic Reduction (SCR) with AdBlue/DEF injection to reduce emissions, Toyolex 3 can disable that. The software removes or nullifies the AdBlue control so the ECU no longer expects the urea injection, preventing “AdBlue system failed” errors.
  
  

• Speed Limiter (Vmax) Correction: Some Toyota diesels have a maximum speed limiter in their ECU (especially trucks and SUVs). Toyolex 3 can adjust or remove that limit so the vehicle can go faster if needed. It’s commonly used on engines like the 1GD-FTV (2.8L Diesel Hilux/Prado) or 1KD-FTV/2KD-FTV (3.0L/2.5L diesel).
  
  

• Catalytic Converter/Lambda Sensor Disable:Toyolex 3 can disable the exhaust catalyst and oxygen sensor (lambda) monitoring. On diesels (1GD-FTV, 2GD-FTV, etc.) or on gasoline engines, it removes the ECU’s checks on the catalytic converter and oxygen sensor so that the ECU stops looking for normal cat/lambda behavior.
  
  

• Injection Components (IMV/IMR) Disable: The software can also turn off certain injection system components. For example, it can disable the IMV (Injection Metering Valve) which controls fuel rail pressure, or the IMR (Intake Manifold Runner) which can affect airflow. These parts of the injection system can sometimes cause issues, and Toyolex 3 lets you shut them off to simplify the system.
  
  

• Miscellaneous Special Functions: Beyond the main ones above, Toyolex 3 includes a few niche toggles. It can disable the Active Grille Shutter (AGS) on some models, turn off the Secondary Air Pump (SAP) used for cold start, or even deactivate Valvematic (Toyota’s variable valve lift system) if present. These features are less frequently needed but illustrate how thorough the tool is.
  
  

• Limited Immobilizer (IMMO) Off: Interestingly, Toyolex 3 does have a partial immobilizer disable function, but only for certain diesel engines (1KD, 2KD, 1GD, 2GD) using Gen1 or Gen2 Denso ECUs. In other words, it can perform “IMMO OFF” on some older Toyota diesels – though for full-fledged immobilizer work on all models, Toyolex 4 is the intended tool. (We’ll discuss this overlap later.)
  
  

All of these features are applied with a few mouse clicks in the Toyolex 3 interface. The program automatically recognizes the generation of the ECU file (Gen1, Gen2, or Gen3 Denso) and shows you only the options that make sense. You simply load the ECU binary file (usually a .bin obtained from a flasher like Kess, K-TAG, MPPS, Tech2, etc.), then select the desired modification (for example, “Disable DPF”) and run it. The software patches the file in memory, creates a new ECU file, and you then write that back to the ECU.

For example, to clear DTCs, Toyolex 3 will display all stored fault codes from the ECU’s memory. You check the ones you want to clear (or simply “erase all”), and the program removes them. For DPF disable, it locates the DPF-related maps or logic in the file and zeros them out or sets them to “off”. The user never needs to know the low-level details; they just pick the function, click a button, and the magic happens. Because Toyolex 3 edits the file rather than communicating live over OBD (like some tuners do), all work is done in software.

The interface is generally described as user-friendly, with clear menus and options. Once a function is applied, Toyolex 3 will typically save the patched file under a new name (e.g. “originalfile_DPFOff.bin”) so you don’t overwrite the original copy until you’re sure the change works correctly. It also has a feature to automatically clear related DTCs when doing things like immobilizer disable. In practice, I always keep the original file backed up, apply one change at a time, and test the vehicle with each new file on the ECU to confirm everything runs smoothly.

DTC Code Erase

Clearing Diagnostic Trouble Codes (DTCs) is perhaps the simplest function Toyolex 3 offers, but it’s fundamental. Every ECU can log faults (the reason your check engine light might be on) in what Toyota calls P-codes (powertrain),  B-codes (body), and U-codes (network). Toyolex 3 reads the loaded file’s DTC memory and shows you a list of codes. You can then select any code (or all of them) and erase them. This is especially handy after disabling systems like EGR or DPF – without physically removing the parts, those systems normally throw errors. By wiping those errors, the vehicle’s dashboard lights turn off and the ECU stops running limp modes. In many cases, simply clearing the codes with Toyolex 3 is enough to make an engine run “clean” again if the underlying parts have been disabled. However, one must remember this is not a permanent fix for a bad part; it just hides the symptoms in software.

For example, on my diesel Hilux that had an EGR flap stuck open, I used Toyolex 3 to erase the P0401 and P0402 codes (EGR flow codes) after disabling the EGR. The ECU accepted the change and no longer checked the EGR input. The engine ran smoothly without throwing a CEL. The DTC function supports clearing P, B, and U codes – so even non-engine issues stored in the car’s ECU memory can be reset via this tool..

Disabling the Diesel Particulate Filter (DPF)

One of Toyolex 3’s most powerful features is its ability to disable the Diesel Particulate Filter in Toyota/Lexus diesels. The DPF is a big metal canister in the exhaust that catches soot and burns it off during regeneration cycles. When it works, it helps reduce emissions, but it also leads to problems: DPFs clog over time, regeneration burns extra fuel, and a failed DPF can ruin an engine. In many Toyota diesel vehicles – Hilux, Land Cruiser Prado, etc. – the DPF can be tricky to replace or expensive. Towing it off-road might not be an option, and in some regions it’s downright illegal to disable. But for off-road or racing applications, or in countries without strict emissions enforcement, some owners choose to remove the DPF entirely.

Toyolex 3 simplifies this by removing the ECU’s DPF logic. When you apply the “DPF disable” function in Toyolex 3, the software finds all the references to DPF presence, DPF pressure sensors, and regeneration control in the ECU program and neutralizes them. In effect, the ECU will behave as if there is no DPF installed. It will no longer attempt to run regeneration cycles or log errors about exhaust backpressure.

Using this function is straightforward. I once had a 2012 Toyota Hilux with a clogged DPF that kept throwing regeneration faults (and of course the owner just wanted the truck to run without worrying about costly repairs). I connected an OBD flasher to read the ECU’s firmware to a .bin file, then loaded that file into Toyolex 3. I clicked the “DPF disable” option, and the program indicated it had removed the DPF settings. After saving the new file and reflashing the ECU, the diesel Hilux started up and ran normally – with 100% of DPF logic gone. All the smoke and fuel-burn issues from regeneration disappeared, and the error light never came back (because there was no DPF to regenerate or sense!). From that point on, the truck simply ran as a non-DPF engine, which was perfect for our racing use on a closed course.

It’s worth noting that when you disable a DPF with software like Toyolex, you also typically disable related sensors (differential pressure sensor, and EGT monitoring if any). So, physically, the DPF can be removed or left in place empty, and the ECU no longer knows or cares about it. Legally, of course, this is only for off-road or competition use in places where it’s allowed. Technically, it works on a wide range of Toyota diesel ECUs (Gen2 and Gen3) where the DPF function exists.

Disabling Exhaust Gas Recirculation (EGR)

The EGR system is meant to reduce NOx emissions by recirculating some exhaust gas back into the intake. While environmentally friendly, it’s notorious for causing carbon buildup and decreasing power. Many performance tuners choose to turn off or remove EGR to keep the intake clean and restore a bit of horsepower. Toyota’s diesel EGR systems (and even gasoline ones on larger engines) can be disabled via Toyolex 3.

To do this, Toyolex 3 locates the EGR control parameters in the ECU’s code and sets them so that the EGR valve never opens. Essentially, the EGR map is zeroed out or turned off. After applying “EGR disable,” the ECU simply behaves as if the EGR valve is permanently closed (it might even ignore the EGR sensor signals entirely). The result is no recirculated exhaust, no EGR-induced lag, and no EGR fault codes.

In practice, using EGR disable with Toyolex 3 is very similar to the DPF process. You read out the ECU, run the feature, and reflash the modified file. One day I had a Land Cruiser Prado with high idle, whining and the codes P0403/P0404 (exhaust position sensor signals). I used Toyolex 3’s EGR disable, and it fixed everything. After reflashing, the engine’s ECU never tried to move the EGR valve, and all those codes vanished. The intake manifold stayed cleaner, and throttle response improved slightly.

Other Special Functions (AdBlue, Vmax, Catalysts, etc.)

Beyond the headline functions above, Toyolex 3 packs a suite of additional options that some users find very handy:

• AdBlue/SCR (Urea) Disable: In markets where Toyota diesels use Selective Catalytic Reduction (SCR), Toyolex 3 can turn off that logic. If your 2.8L or 1.6L Toyota diesel uses AdBlue, disabling it saves the trouble of refilling fluid and eliminates related error messages.
  
  

• Speed Limiter (Vmax) Adjustment: Toyota often caps the top speed in diesel models. For example, the Hilux 2.8L Diesel is often limited to about 180 km/h. Toyolex 3 can alter these maps so you can go faster (if your tires and local laws allow). Internally it finds the vehicle speed maps and lets you tweak or remove the cap.
  
  

• Catalytic Converter/Lambda Sensor Off: For both diesel and gas engines, you can disable the catalytic converter monitoring or oxygen sensor feedback. This is usually done by setting those sensor inputs to a fixed “normal” value so the ECU thinks everything’s fine, preventing CEL triggers related to cat efficiency.
  
  

• IMV/IMR Valve Disable: The IMV (Injection Metering Valve) and IMR (Intake Manifold Runner) valves control fuel pressure and intake flow respectively. By disabling these, the fuel system and intake behave in a simplified way (the ECU acts as if they’re always in a default state). This can help avoid faults caused by those parts.
  
  

• Active Grille Shutter (AGS) Off: On some petrol models, the front grille can close to improve aerodynamics. Toyolex 3 can switch off this function, which some find troublesome if it gets stuck or interferes with cooling at low speeds.
  
  

• Secondary Air Pump (SAP) Off: The SAP injects air into the exhaust during startup to reduce emissions. It’s largely unnecessary after break-in. Toyolex 3 can disable the SAP circuit so the pump doesn’t run.
  
  

• Valvematic Off: On certain Toyota engines, “Valvematic” is a variable valve-lift system. If it causes problems or you simply want a simpler engine response, Toyolex 3 can deactivate Valvematic control.
  
  

These extra features are not the focus of most users, but they demonstrate how  deep Toyolex 3’s access to the ECU code goes. It’s essentially a toolkit for toggling off anything the factory enabled for emissions or efficiency.

Using Toyolex 3: A First-Person Example

Let me tell you a quick story to illustrate how Toyolex 3 is used in the real world:

A few months ago I had a 2012 Toyota Hilux at my shop – a rough diesel 3.0L D4D engine with a Gen2 Denso ECU. The owner was frustrated: a persistent DPF warning light and check engine light haunted him for weeks. The truck spent more time regenerating its filter than actually off-roading. After failed attempts at cleaning, we decided the DPF had to go. But instead of physically cutting it out and worrying about sensors, I reached for Toyolex 3.

I connected our OBD flasher (a KTAG) to the Hilux’s OBD port and made a full backup of the ECU to a .bin file on my laptop. Then I ran Toyolex 3, loaded that file, and went straight to the “Disable DPF” function. With a couple of clicks, the software patched the file. I saved it as hilux_dpf_off.bin. Finally, I reflashed the Hilux’s ECU with the new file via the flasher. When I started the engine, it rumbled to life without any DPF or regeneration lights. Over the test drive, the DPF lamp never came on, and the truck ran smoother without all the interrupted regen cycles. The owner was thrilled – the dreaded DPF problem was banished by software alone.

In another case, I once worked on a Lexus NX200t (a gas engine) that had recurring misfire codes due to a failing EGR system. Rather than swap the entire intake, I used Toyolex 3 to disable the EGR. Again, I took the ECU dump, loaded it, chose “EGR Off,” and reflashed. That single change made the misfire codes go away and the car ran clean. The customer lost a tiny bit of mileage but gained reliability and peace of mind.

In each of these experiences, Toyolex 3 lived up to its billing: it let me target specific ECU functions and toggle them off without soldering wires or opening ECUs. A few button clicks, and the ECU software no longer cared about the old hardware parts.

Deep Dive: Toyolex 4 Functionality (Immobilizer Off)

Where Toyolex 3 is about emissions and engine behavior, Toyolex 4 is about security. Specifically, Toyolex 4 (Black Diamond Edition) is built exclusively to disable the immobilizer system in Toyota, Lexus, and related vehicles. The immobilizer is an anti-theft feature: normally the engine won’t start unless the ECU sees the correct transponder key code. Disabling it effectively makes the car start with any key or without a key’s coded permission.

What Does “Immobilizer Off” Mean?

The immobilizer works because part of the ECU’s flash memory contains a special code or lock that links the engine to the specific transponder keys. If that code is intact, the ECU continuously checks for the correct key token. Toyolex 4 finds the block of data in the ECU’s firmware that governs the immobilizer and erases or overrides it. When the flash file is written back to the ECU, the immobilizer check is gone – the engine “thinks” the correct key is always present.

This process is a world first for Toyota Denso ECUs as claimed by Toyolex 4’s marketing. It means you do not have to dismantle the ECU or modify wiring. In the past, mechanics might physically cut wires or remove modules to bypass immobilizer. Toyolex 4 does it all in software, in the flash file. After the mod, you simply reflash the ECU through your OBD tool and voila – the engine starts without the factory security.

How Toyolex 4 Works

The basic steps with Toyolex 4 are quite similar to Toyolex 3:

1. Read the ECU File – Use any Denso-compatible flasher or programmer (KESS, KTAG, PCMflash, etc.) to read the ECU’s firmware to your computer. You get a binary file (.bin or .elf).
   
   

2. Open Toyolex 4 and Load File – Launch the Toyolex 4 software on your Windows PC and open that ECU file.
   
   

3. Select “IMMO Off” – In the interface, you click the option to disable the immobilizer. Toyolex 4 uses an advanced algorithm to detect the immobilizer block within the file automatically. It will show a status that the IMMOBILIZER block has been removed.
   
   

4. Apply & Save – Toyolex 4 patches the file and saves a new copy, often automatically naming it something like originalfile_immo_off.bin.
   
   

5. Reflash ECU – Use your flasher to write the new file back to the ECU memory. Once written, the ECU no longer contains the immobilizer lock, and the car can start without checking the original key.
   
   

Behind the scenes, Toyolex 4 is very sophisticated. It specifically recognizes various Denso microcontroller cores used in Toyota ECUs (like the R7F701202/216 series for Gen3, D76F series for Gen2, and NEC 76F00 series for Gen1, with some exceptions). It zeros in on exactly the part of the code that stores the immobilizer data. The manufacturer claims this process has “ZERO risk” on Gen3 ECUs because it only touches that one block of memory.

An important bonus is that Toyolex 4 can optionally erase all DTCs at the same time. The software can be configured to do an “IMMO Off + Clear DTCs” in one go. This is helpful because after removing the immobilizer, any related fault codes (like “Key Not Found”) are also wiped so the ECU comes up clean.

Crucially, all of this happens with the ECU in its normal, sealed state. The Toyota ECU never needs to be opened or have wires cut. The entire operation is software-based through the OBD port. For many professional tuners, this is a huge convenience and safety factor.

Using Toyolex 4: A First-Person Example

To illustrate Toyolex 4 in action, here’s another true-life scenario:

Last winter I worked on a salvage Lexus GS350 that came in without its smart key. The owner had lost all keys, and buying new keys and programming them was going to be very expensive. He just needed the car to run with a simple workaround. I decided to use Toyolex 4 to disable the immobilizer entirely.

First, I used my KESS OBD tool to read the ECU file from the Lexus (a Gen2 Denso ECU in a 2015 model). I saved this binary file to my laptop. Then I fired up Toyolex 4 on Windows 10 and loaded the file. On the Toyolex interface I clicked “IMMO OFF.” The program recognized the immobilizer code and said it was removed. I saved the modified file (it added a suffix _IMMOOFF automatically). Back in the Lexus, I flashed the new file. When I tried to start the engine, it turned over and fired right up on a generic bypass key (or even without a transponder key in place). The immobilizer light never came on. We effectively revived the engine with no original keys needed. The owner just used a cheap spare key blade with the chip removed, and the car ran fine.

In another case at my garage, a friend was transplanting a 1KD Diesel engine from a wrecked Hilux into an older Land Cruiser. The donor Hilux ECU still had its immobilizer tied to the old Hilux keys. Instead of messing around with key synchronization, I used Toyolex 4 on the Hilux ECU file. After disabling the immoblizer, I could plug that ECU into the Cruiser, and it started instantly without any key programming. It saved us a lot of headache.

These examples show that Toyolex 4 can be invaluable for “key off” situations: lost keys, engine swaps, salvage rebuilds, or custom builds. It also means one can prepare an ECU for testing on a bench without needing the factory key present.

Toyolex 4 Additional Notes

• Scope of Compatibility: Toyolex 4 supports Generation 1, 2, and 3 Toyota/Lexus Denso ECUs (covering most common petrol and diesel engines). The only major exceptions are hybrid vehicle ECUs (because their immobilizer is done differently) and locked Gen3 ECUs with improper past programming. It even includes older Hino trucks with N04 diesel engines (those run on the same Denso technology). So in practice, if your Toyota/Lexus runs on a Denso ECU (which most do, except some new hybrid units), Toyolex 4 should be able to disable the immobilizer.
  
  

• No ECU Opening: As noted, there’s no need to open up the ECU housing or physically modify the hardware. All work is done in software.
  
  

• OBD Flashing Only: Some competitor techniques require bench cloning and hardware keys. Toyolex 4 is designed to work with the binary file, so any software flasher that can read/write Denso ECU memory will do.
  
  

• Zero Risk on Gen3: The developers emphasize that on Gen3 Denso ECUs (roughly 2017 and later models), the process is safe. The code path they use does not overwrite other important data. As always, take backups just in case, but in  my experience it’s been rock solid.
  
  

• Other Code Clearing: Toyolex 4 can automatically clear trouble codes as part of the process, which is convenient (for instance, if the dashboard was showing a “security system” error, it goes away).
  
  

Toyolex 4 download link

Supported ECUs and Model Compatibility

Both Toyolex 3 and 4 are specific to Denso ECUs used in Toyota and Lexus vehicles (and a few related brands like Hino). They do not support non-Denso ECUs (e.g. Bosch or others) or vehicles outside the Toyota/Lexus family. Within the Toyota/Lexus world, that covers a vast number of models and engine types from roughly 2000 onwards.

In general, here’s how compatibility breaks down:

• Denso ECU Generations: Toyota Denso ECUs are categorized into three generations (Gen1 ~2000-2008, Gen2 ~2009-2016, Gen3 ~2017 onwards). Toyolex 3 supports all three generations of Denso ECUs. Toyolex 4 also supports Gen1-3 (with some exceptions on very old Gen1s and no hybrids). This means most vehicles sold in the past 15 years are covered.
  
  

• Gasoline Engines: Many Toyota and Lexus gasoline models use Denso ECUs. Examples include compact cars (Toyota Corolla, Yaris), sedans (Camry, Avalon, Lexus ES), SUVs (RAV4, Highlander, Lexus RX), and trucks (Tacoma, Tundra). If the ECU is a Denso unit, Toyolex 3 can disable the catalyst or EGR on them, and it can erase DTCs. Toyolex 4 could disable the immobilizer on the same models as well (except if they’re a hybrid variant).
  
  

• Diesel Engines: Among Toyota vehicles, the common diesel engines with Denso ECUs include:
  
  

  • 1KD-FTV (3.0L diesel used in Hilux, Land Cruiser Prado/Fortuner, etc.)
    
    

  • 2KD-FTV (2.5L diesel in some Hilux/Tacoma models)
    
    

  • 1GD-FTV (2.8L diesel in newer Hilux/Prado, including North American Tacoma)
    
    

  • 2GD-FTV (2.4L diesel, Hilux/Prado)
    
    

  • 1VD-FTV (4.5L V8 diesel in Land Cruiser 200 Series)
    
    

  • N04C (4.0L diesel in some Land Cruisers and Dyna trucks)
    For all these diesels, Toyolex 3 can remove DPF, EGR, AdBlue (where applicable), and Toyolex 4 can do immo-off (especially useful on them if keys are lost).
    
    

• Hybrid Models: Toyota hybrids (Prius, Prius C, CH-R Hybrid, RAV4 Hybrid, etc.) do use Denso ECUs. Toyolex 3 can open and edit these files for DTC erasure or (depending on generation) some of the special functions. However, Toyolex 4 does NOT support disabling immobilizers on hybrid ECUs – it will recognize the file as “hybrid” and typically prevent the IMMO off process. Toyota hybrid ECUs have an extra layer of security and using them with Toyolex 4 would not work (the software will warn you). So for hybrids, only Toyolex 3 functions are available (and even then, only certain functions apply to hybrid-specific systems).
  
  

• Other Toyota Models: Apart from the above, there are many others. For instance, the 3.5L V6 engines (2GR-FE, etc.) and 4.0L V6 (1GR) use Denso. The 2AZ-FE and 2AR-FE 4-cylinder engines do as well. Toyolex 3 can dsable EGR and catalyst on those. Toyota’s JDM (Japan Domestic Market) models often have Denso too. Lexus SC400/SC430 (1UZFE V8, older but Denso), Lexus CT200h (hybrid), Lexus NX 300h (hybrid), etc. Many Lexus models share hardware with Toyota, so they fall under the same Denso umbrella.
  
  

• Unsupported Cases: The only major Toyota/Lexus vehicles not covered would be ones with non-Denso ECUs (e.g. very early 1990s Bosch-equipped models, or some luxury models with Bosch or Hitachi); or cars with factory immobilizer architectures not on Denso (the main one being some hybrid systems). Newer Toyota/Lexus plug-in hybrids and EV components may also have proprietary controllers. But for almost every mainstream Toyota/Lexus on the road (or a salvage yard, or racing circuit), these tools will apply.
  
  

In summary, whether you have a Corolla, a Hilux, a Lexus LS, or a semi-trailer Hino truck, if it runs a Denso ECU, there’s a high chance Toyolex 3 and/or 4 can work with it. Users typically mention Hilux/Prado (diesels), Fortuner, RAV4, Land Cruiser, Tacoma, Camry, Lexus RX/GS/LS, and many others.

Software Environment and Usage Requirements

Both Toyolex 3 and Toyolex 4 are Windows-based applications (usually supporting Windows 7, 8, 10). You install them on a PC or laptop – it’s best if this computer is dedicated for tuning (often disconnected from the internet and with antivirus disabled during installation, since some antivirus programs misidentify ECU-tuning software as suspicious). The Toyolex installation usually requires you to run an installer and input a license key or use a keygen provided when you purchase the software. Each tool (3 and 4) is a separate product, so they have their own licenses.

Once installed, the general workflow is:

1. Connect your ECU read/write tool: Use a known ECU flasher for Toyota Denso ECUs (examples include KESS V2 (OBD), K-TAG (bench), PCMflash, Galletto, MPPS, and others). Connect to the vehicle’s OBD-II port (for OBD reads/writes) or open the ECU physically (for bench reads/writes).
   
   

2. Read the ECU file: With the flasher software, read the ECU’s full firmware. Save it to a binary file on your PC (usually as a .bin file, but .hex or .map may also work if supported, but .bin is standard).
   
   

3. Open Toyolex: Launch Toyolex 3 or 4 on the same PC. Both run as standalone programs. They don’t need the car connected while you’re editing – you only need the file.
   
   

4. Load the binary file: In the Toyolex GUI, click “Open” and select the .bin file you just read. The software might immediately identify the ECU generation or engine code.
   
   

5. Choose the function: In Toyolex 3, you would choose something like “Erase DTC,” “Disable DPF,” or “Disable EGR.” In Toyolex 4, you click “IMMO Off.” Often the interface has buttons or menus labeled with each capability. There is usually a help popup that will describe what each function does.
   
   

6. Execute the modification: Click the button or menu item for the feature. Toyolex will process the file, usually very quickly (seconds). It then indicates success.
   
   

7. Save the modified file: The tool will prompt you to save the new binary. Use a different filename (the software often auto-suggests one with a suffix). Now you have a “patched” file.
   
   

8. Write back to ECU: Use your flasher to load the patched file and program it into the ECU. This is often done via OBD, so the car may need to be in ignition-on state but not running. The flasher overwrites the ECU memory with your new file.
   
   

9. Verify changes: After programming, restart the engine and verify that the change took effect. For example, the DPF or EGR warning light should be gone, or the immobilizer light gone. You might also rescan for DTCs to confirm none popped up.
   
   

In terms of software environment specifics:

• Operating System: Toyolex 3/4 typically run on Windows 7, 8, 10 (mostly 32-bit or 64-bit). Some vendors mention compatibility even with Windows Vista. There is usually no Mac or Linux version; if you have a Mac, people often run Windows in a virtual machine for such tasks.
  
  

• File Formats: The tools work with raw ECU dump files. Usually these are raw binary (BIN) or sometimes Motorola S-Record (S19). If your flasher gives a .map or .hex, Toyolex might still be able to open them if they contain the full binary. But using a straight .bin is the safest bet. Note: Toyolex expects the entire firmware; partial remaps (calibrations only) are not typical for these disabler functions.
  
  

• License & Keys: You’ll need a licensed copy or keygen provided by the seller. The software will likely check that the key matches the installation. If using an illegal copy, some sellers require remote TeamViewer session to install. (Since this is a blog style explanation, I won’t go into any license cracking details.)
  
  

• Antivirus: Many ECU tools, including Toyolex, trigger antivirus warnings. It’s standard practice to disable antivirus software during installation and possibly during operation to avoid conflicts. The vendor instructions often explicitly warn to turn off antivirus.
  
  

• Drive Space/Size: Toyolex 3 and 4 are not huge programs (under a few hundred MB) but the ECU files can be 1-2 MB typically. Have enough free disk space for multiple backups.
  
  

• OBD Cables: Use a good quality OBD cable (like KESS cable) for reliability. Some cheap cables might corrupt data during read/write.
  
  

• User Skill: The tools themselves are one-click, but using them requires some expertise. You need to know how to properly read/write ECUs, how to restore an ECU if something goes wrong, and be aware of legal issues. The Toyolex interface often warns “for professional use” because misuse can brick ECUs or cause problems.
  
  

Toyolex 3 vs Toyolex 4: A Detailed Comparison

It’s worth emphasizing in a separate section how these two tools differ. They share a common name and focus on Toyota/Lexus, but they are designed for non-overlapping jobs. In fact, one might say Toyolex 3 and 4 are like sisters, each in a different career:

• Primary Purpose: Toyolex 3 is a tuning/emissions tool. It’s used when you want to change how the engine or emissions system behaves (disabling DPF, adjusting Vmax, clearing codes, etc.). Toyolex 4 is an immobilizer tool. It’s used when you want to remove the car’s security lock (enable any key to start).
  
  

• Features: Toyolex 3 offers many features (DPF off, EGR off, AdBlue off, Vmax, SAP off, etc., plus DTC erase, plus limited immo off on some diesels). Toyolex 4 basically offers one function – immobilizer off (with optional DTC erase). Because Toyolex 4 focuses on one critical task, it includes a powerful algorithm for it, but it doesn’t do the broad list of engine tweaks that 3 does.
  
  

• Software Layout: Toyolex 3’s interface has a menu or list of many options. You pick “Disable EGR,” “Disable DPF,” etc. Toyolex 4’s interface basically has an “IMMO OFF” button (and possibly a DTC erase toggle). The setups are distinct.
  
  

• Intended Use-Cases: If your project is about emissions, performance, or fixing sensors (DPF/EGR/etc), you would reach for Toyolex 3. If your project is about key security (lost keys, custom engines, salvage rebuilds), you reach for Toyolex 4. They serve entirely different jobs.
  
  

• Overlap: One minor overlap – Toyolex 3 includes a limited immobilizer disable for certain Toyota diesels (1KD/2KD/1GD/2GD on Gen1/2). It’s mainly intended for cases like engine swaps where older trucks are involved. But it won’t work on all models. Toyolex 4, on the other hand, is designed to do it for everything it supports. Also, Toyolex 4 can clear DTCs (specifically security-related ones) as part of its process, but it does not have the breadth of code/feature toggles that Toyolex 3 has.
  
  

• Updates and Licensing: Practically, Toyolex 3 and Toyolex 4 are separate software products with their own purchase/licensing. You cannot use a Toyolex 3 license to run Toyolex 4, and vice versa. They get updates on their own cycles. (In fact, Toyolex 4 is sometimes called “Black Diamond Edition” in branding, which sets it apart as a specialized version).
  
  

• Naming Confusion: It can be confusing because one might think Toyolex 4 is simply a newer version of Toyolex 3, but it isn’t. It’s a parallel tool in the Toyolex family. Some sellers emphasize this by describing Toyolex 4 as “the first application exclusively for IMMO OFF” and telling customers “for DPF/EGR you must see Toyolex 3 instead”. In other words, if your goal is emissions/performance mod, 3 is the product. If your goal is immobilizer removal, 4 is the product.
  
  

• Effect on ECU: Toyolex 3 edits the ECU to disable or clear multiple vehicle functions, but it leaves the bulk of the engine management intact. Toyolex 4 specifically zeroes out the immobilizer section; everything else (like fuel maps, throttle, etc.) stays untouched. This means theoretically Toyolex 4 has a lower “footprint” change in the file, whereas Toyolex 3 might significantly change multiple blocks.
  
  

• Risks and Reversibility: Both tools depend on re-flashing the ECU, which always carries some risk if done improperly. However, disabling emissions equipment (Toyolex 3) is generally safe to reverse by reflashing the original file. Disabling immobilizer (Toyolex 4) is irreversible in the sense that once you write the “IMMO OFF” file, that ECU will never accept normal keys again (the immobilizer data is gone). If you ever need to re-enable it, you’d have to get a new ECU or an ECU programmer that can re-write immobilizer data. So Toyolex 4’s changes are effectively permanent to that ECU. Toyolex 3’s changes are also persistent until you reflash back to stock, but the main point is that immobilizer off cannot be undone by any simple means because the code is removed entirely.
  
  

• Use Stories: As a takeaway, you might summarize: “After using Toyolex 3 to fix a Hilux’s DPF issue, I reached for Toyolex 4 when a different Hilux needed its keys disabled.” Each tool has its own narrative. You won’t use Toyolex 4 to disable an EGR valve, and you won’t use Toyolex 3 to wipe immobilizer for all models. They complement each other only in that they both manipulate ECU software, but otherwise they occupy distinct niches.
  
  

In SEO terms, think of Toyolex 3 as an “ECU special functions” software and Toyolex 4 as an “ECU immobilizer removal” software. They happen to share the name “Toyolex” because the developers are the same, but functionally they do not overlap.

Software Requirements and Workflow (Windows, File Types, Tools)

To recap some of the points in the context of what an operator needs:

• Operating System: Both Toyolex 3 and 4 require a Windows PC (Windows 7/8/10 are common). They are typically distributed as Windows executables (with installers). They may require Microsoft .NET Framework or other common Windows runtimes, but usually the installer includes all needed dependencies.
  
  

• Supported File Types: The tools work on raw ECU flash files. Usually these are binary dumps with a .bin extension. Some flashing tools output .hex or .map, and sometimes Toyolex can open those if they are in the right format, but .bin is the standard. Essentially, Toyolex expects the whole ECU memory image as a flat binary.
  
  

• ECU Flashing Tools: Toyolex itself does not communicate with the ECU; it only edits files. So you need a separate OBD/programming tool to actually read and write the ECU. Common examples for Toyota are:
  
  

  • Kess V2 (by Alientech) – an OBD interface that reads/writes via the OBD-II port.
    
    

  • K-TAG – a bench programmer that can connect to the ECU’s board directly.
    
    

  • PCMflash – another software that supports OBD reading/writing on Toyota.
    
    

  • Galletto/MPPS – older interfaces that also support Toyota to some extent.
    
    

  • Techstream (Toyota’s official tool) – does not allow direct binary file read/write in the same way; so Toyolex usually requires aftermarket tools instead of Techstream.
    You also need the specific cable that fits your tool and the vehicle’s OBD connector.
    
    

• Laptop/PC Setup: It’s common to use a dedicated tuning laptop. Many shops have an old, no-internet laptop just for these sorts of programs, because some of them get flagged by antivirus. It’s wise to remove or disable real-time antivirus scanning when running Toyolex (and related flasher software). You might also have to run the program as Administrator.
  
  

• Power Supply: For vehicle work, ensure the vehicle battery is stable (maybe use a battery charger) when reading/writing to the ECU, since losing power mid-flash can brick the ECU. On a bench setup, use the target power sources recommended for the ECU.
  
  

• License and Activation: When you buy Toyolex, you typically get an “unlock code” or license file that enables the program on your PC. Follow the vendor’s instructions to register it. After that, the program should say something like “activated” or show a license menu.
  
  

• Backups: Always make at least one backup of the original ECU file before doing anything. If Toyolex produces weird results, you can restore the original and retry. Also, keep backups with descriptive names (e.g. car_model_ecu_original.bin, and the patched one separately).
  
  

• Technical Skill: Operating Toyolex requires a good understanding of ECU flashing. You should already know how to connect your flasher tool to the car, how to use its software, how to find the right protocol, etc. Toyolex adds the software-edit step. It assumes you already successfully read an ECU file. It also assumes you know to check engine behavior after flashing. Without a reliable flashing tool and proper technique, you risk a failed flash.
  
  

Typical Workflow Step-by-Step

Here’s an example workflow to illustrate exactly what you’d do for, say, disabling DPF on a Toyota using Toyolex 3:

1. Turn on laptop, disable antivirus, open flasher software (e.g. Kess).
   
   

2. Connect flasher to OBD-II port of the Toyota. Turn ignition to “ON” (engine off or as required by tool).
   
   

3. Use flasher to read the ECU’s entire memory. The tool will typically say “Read ECU” and might ask for some settings. Once read is complete, save the file as toyota_corolla_original.bin.
   
   

4. Open Toyolex 3 on the laptop. Select “Load file” and choose toyota_corolla_original.bin.
   
   

5. In Toyolex 3’s menu, click “Disable DPF” (or whatever feature). Confirm any prompts. The program processes the data.
   
   

6. After it finishes, click “Save”. It suggests a filename like toyota_corolla_original_DPF_OFF.bin. Save it.
   
   

7. Exit Toyolex 3, open your flasher software again.
   
   

8. With the car still ON, choose “Write ECU” or similar on the flasher. It will ask for a file; choose toyota_corolla_original_DPF_OFF.bin.
   
   

9. Start the flash process. The flasher writes the new file to the ECU memory.
   
   

10. Wait until it finishes and shows success. Turn off ignition, then start engine to test.
    
    

11. Check for check-engine light. If the DPF light is gone and the truck drives normally, you’re done. If not, troubleshoot as needed (maybe reflash the original and try again or take it to a specialist).
    
    

Toyolex 4 follows the same steps 1-4, but you would click “IMMO OFF” instead of “Disable DPF.” And the new file might be named _IMMO_OFF.bin. Then you reflash and test that the car no longer requires its original key.

Conclusion

Toyolex 3 and Toyolex 4 are powerful, specialized tools for advanced Toyota/Lexus ECU modifications. Toyolex 3 is like a broad-tuning software: it erases codes, disables emissions parts (DPF, EGR, AdBlue, catalytic sensors), lifts speed limiters, and more, all with a few clicks. Toyolex 4 is laser-focused on removing the immobilizer system via the ECU flash file. Despite the similar names, they do completely different jobs.

In practice, a tuner or mechanic might use both – Toyolex 3 when working on performance or emissions issues (for example, fixing a DPF fault on a Hilux), and Toyolex 4 when dealing with key programming or security lockouts (for instance, reviving a Lexus with lost keys). Both tools require the user to have a Windows PC, the appropriate ECU flashing hardware, and a basic understanding of ECU file manipulation.

We’ve covered how each one functions, given examples of real-life usage in a workshop, and outlined the Toyota/Lexus models they support. By understanding the capabilities and purposes of Toyolex 3 and 4, you can choose the right tool for your project: use Toyolex 3 to turn off a troublesome DPF or EGR, and use Toyolex 4 to bypass an engine’s immobilizer. With the right approach and precautions, these software packages can save you time and money on complicated ECU tasks that used to require hardware mods or dealer work.